|
 |

UPC Polyurea Coatings
UPC Coatings Overview
- UPC
6001 - is a rapid set polyurea spray elastomer coating with
superior performance in applications for concrete and metal
surfaces. It has excellent hydrolytic stability, is non-water
absorbing, tested and rated for permeability for marine
applications. High chemical resistance, abrasion and flex
characteristics.
- UPC
6001M - eliminates all hydroxyl terminator polyol chain
extenders and replaces them with amine terminated chain extenders.
This process minimizes the amount of oxygen in the molecule
promoting a greater degree of resistance against micro bacteria
that attack the oxygen linkage in the molecule. Excellent product
for micro digester tanks and reactors. A true 100% spray Polyurea.
- UPC
6002I - A high hardness and abrasion resistant material
good for economical industrial applications. Excellent adhesion
and tensile strength characteristics good for impact resistance,
abrasion protection and encapsulation.
- UPC
6002R - Is a 100% solid (No VOC) Polyurea / Polyurethane
fast set spray coating designed for waterproofing existing roof
structures. Non-shrinking, non-color stable, gray or silver
reflective color for heat dissipation and UV reflection,
hydrolytic stable and excellent adhesion.
- UPC
7200 - is a two component (1-1 ratio) high performance
roll-on aliphatic UV stable polyurea coating. It is formulated for
high physical properties and fast return to service capability. It
is available in clear and a variety of colors.
- UPC
7300 - is a two component (1-1 ratio) high performance
roll-on aromatic primer / base coat. It is a fast cure primer with
excellent waterproofing capability . Guardian 7300 has excellent
adhesion characteristics.
- UPC
9200 - A slow cure high performance polyurea spray coating
with tack free times up to 8 minutes. Designed not to drip or run
while spraying vertical surfaces. It has excellent hydrolytic
stability, high gloss finish with improved UV stability in an
aromatic polyurea.
- UPC
9200M - A slow cure high performance high hardness and
abrasion resistant polyurea spray coating used in marine steel and
timber applications. Rated for permeability with improved UV
stability in an aromatic polyurea.
- UPC Quick Joint 85 - is a 2 component (1-1 ratio) self- leveling joint
filler. Designed for movement with excellent elongation
and strong physical properties. It is quick set with a return to service time as little
as 1 hour.
- UPC Quick Joint 45
-
is a self-leveling polyurea joint sealant material. Designed for
30% joint movement of with excellent adhesion
and memory capability. Applications include control and expansion joints indoor and outdoor
use.
|
|